Nitrogen containing pollutants, such as ammonia, nitrites and nitrates, are substances of concern due to their increasing amount in water, mainly in agriculturally intensive areas. They are correlated to many health issues, especially for infants and children, as well as with environmental problems given they are nutrients and induce uncontrolled increase of algal growth, especially in closed basins. Conventional biological treatment is insufficient to remove these pollutants from water, so that a tertiary specific treatment is needed. Photocatalytic processes may be effective for the oxidation of ammonia and the reduction of nitrites and nitrates [1,2]. However, in the literature these processes are poorly explored and, furthermore, the attention is mainly focused on the materials rather than on reactors and process set up. Furthermore, scale up issues are mostly unaddressed. Therefore, in this work we focused on some simple TiO2-based materials, in case added with Ag, Au, Pt or Pd as co-catalysts, for the photocatalytic removal of NH3, NO3- and NO2-. The activity of each sample was compared by using two different slurry type photoreactors, ca. 300 mL in volume, operated either in batch or semibatch mode. In the latter case air or inert gas was continuously flown during the photooxidation or photoreduction, respectively. Ca. 32% ammonia conversion was achieved over Pd/TiO2 sample in 5 h, with 100% selectivity to N2. Nitrate photoreduction was less effective, leading to max 10.5% conversion after 5 h, but with insufficient selectivity to N2 (44% NH3 selectivity). These results have been combined with the treatment of the same model solutions with sludge of a water treatment plant, which evidenced that the biological nitrate reduction treatment was effective and sufficiently selective, whereas ammonia oxidation activity was by far unsatisfactory. Therefore, a two step process can be designed, with a first NOx- photocatalytic or biological reduction stage, followed by the photooxidation of ammonia, abating the one originally present and the one possibly formed during the reduction step. Finally, process scale up has been addressed, testing some of the most interesting materials in a 10 L photoreactor c/o the ISWA facility in Stuttgart, Germany with real waste water. Maximum ammonia conversion of 4 % was achieved with commercial TiO2 (P25 by Evonik) after 30 minutes (maximum allowed reaction time) with competitive oxidation of organics. Indeed, the COD abatement after 30 minutes of reaction was 20-30%. Acnowledgements The authors are grateful to Fondazione Cariplo (Italy) for financial support (2015-0186 “DeN – Innovative technologies for the abatement of N-containing pollutants in water”). I. Rossetti and E. Bahadori are grateful to Fondazione Cariplo and Regione Lombardia for financial support (2016-0858 – “Up-Unconventional Photoreactors”).
Photodegradation of (emerging) N-containing pollutants in wastewater / F.S. Freyria, M. Compagnoni, E. Bahadori, T.A. Gadhi, N. Ditaranto, M. Armandi, I. Rossetti, G. Ramis, B. Bonelli. ((Intervento presentato al convegno 20. Congresso Nazionale di Catalisi e 20. Congresso Nazionale della Divisione di Chimica Industriale tenutosi a Milano nel 2018.
|Titolo:||Photodegradation of (emerging) N-containing pollutants in wastewater|
|Data di pubblicazione:||2018|
|Settore Scientifico Disciplinare:||Settore ING-IND/25 - Impianti Chimici|
|Citazione:||Photodegradation of (emerging) N-containing pollutants in wastewater / F.S. Freyria, M. Compagnoni, E. Bahadori, T.A. Gadhi, N. Ditaranto, M. Armandi, I. Rossetti, G. Ramis, B. Bonelli. ((Intervento presentato al convegno 20. Congresso Nazionale di Catalisi e 20. Congresso Nazionale della Divisione di Chimica Industriale tenutosi a Milano nel 2018.|
|Appare nelle tipologie:||14 - Intervento a convegno non pubblicato|