Menisci are subjected to different pathologies that affect the proper functions and biology of the knee. Over the years, different techniques were tried to repair meniscus injury and, when the reparation was not possible, to replace or regenerate it. These techniques still present a lack of controlled and independent clinical studies that do not allow identifying their effective failure rate. This rate could be due to a still incomplete knowledge about meniscal biology, its composition, and biomechanical properties. The purpose of this study was to analyze the relationship between the contact forces and the meniscal structures at the level of the femoral and tibial surfaces of the meniscus to improve the knowledge about this tissue, in view of the possible application in tissue engineering, for the production of meniscal scaffolds. Swine meniscal samples were studied for morphological (Safranin-O, Sirius Red, and collagen type I and II), biochemical (DNA, glycosaminoglycans [GAGs] and GAGs/DNA ratio), computed tomography scanning and biomechanical analyses (compression and traction tests) of femoral and tibial meniscal surfaces. Results revealed a biomechanical-dependent characterization of the meniscus. The femoral surface is characterized by a higher quantity of GAGs and a greater amount of cells (p < 0.01 for each analysis), with the interposition of radial and oblique fibers. These features are responsible of a higher resistance (p < 0.05) to compressive forces like that acted on by the femoral condyles. On the contrary, the tibial surface shows a circumferential arrangement of the fibers and a poorer GAGs presence and cellular spread (p < 0.01); these characteristics seem to allow a higher resistance (p < 0.05) of the tibial surface to traction forces. Results from this work provide useful information for the design and creation of meniscal substitute and suggest that the features of the meniscus are biomechanical-dependent, and that its composition and structure are dependent to the different forces that femur and tibia generate upon its surfaces.

Swine Meniscus : Are Femoral-Tibial Surfaces Properly Tuned to Bear the Forces Exerted on the Tissue? / G. Peretti, U. Polito, M. Di Giancamillo, M.E. Andreis, F. Boschetti, A. Di Giancamillo. - In: TISSUE ENGINEERING, PART A. - ISSN 1937-3341. - 25:13-14(2019 Jul 01), pp. 978-989. [10.1089/ten.TEA.2018.0197]

Swine Meniscus : Are Femoral-Tibial Surfaces Properly Tuned to Bear the Forces Exerted on the Tissue?

G. Peretti
Primo
;
U. Polito
Secondo
;
M. Di Giancamillo;M.E. Andreis;A. Di Giancamillo
Ultimo
2019

Abstract

Menisci are subjected to different pathologies that affect the proper functions and biology of the knee. Over the years, different techniques were tried to repair meniscus injury and, when the reparation was not possible, to replace or regenerate it. These techniques still present a lack of controlled and independent clinical studies that do not allow identifying their effective failure rate. This rate could be due to a still incomplete knowledge about meniscal biology, its composition, and biomechanical properties. The purpose of this study was to analyze the relationship between the contact forces and the meniscal structures at the level of the femoral and tibial surfaces of the meniscus to improve the knowledge about this tissue, in view of the possible application in tissue engineering, for the production of meniscal scaffolds. Swine meniscal samples were studied for morphological (Safranin-O, Sirius Red, and collagen type I and II), biochemical (DNA, glycosaminoglycans [GAGs] and GAGs/DNA ratio), computed tomography scanning and biomechanical analyses (compression and traction tests) of femoral and tibial meniscal surfaces. Results revealed a biomechanical-dependent characterization of the meniscus. The femoral surface is characterized by a higher quantity of GAGs and a greater amount of cells (p < 0.01 for each analysis), with the interposition of radial and oblique fibers. These features are responsible of a higher resistance (p < 0.05) to compressive forces like that acted on by the femoral condyles. On the contrary, the tibial surface shows a circumferential arrangement of the fibers and a poorer GAGs presence and cellular spread (p < 0.01); these characteristics seem to allow a higher resistance (p < 0.05) of the tibial surface to traction forces. Results from this work provide useful information for the design and creation of meniscal substitute and suggest that the features of the meniscus are biomechanical-dependent, and that its composition and structure are dependent to the different forces that femur and tibia generate upon its surfaces.
No
English
anatomy; biomechanics; meniscus; swine
Settore MED/33 - Malattie Apparato Locomotore
Settore VET/01 - Anatomia degli Animali Domestici
Settore VET/09 - Clinica Chirurgica Veterinaria
Articolo
Esperti anonimi
Pubblicazione scientifica
1-lug-2019
Mary Ann Liebert
25
13-14
978
989
12
Pubblicato
Periodico con rilevanza internazionale
pubmed
Aderisco
info:eu-repo/semantics/article
Swine Meniscus : Are Femoral-Tibial Surfaces Properly Tuned to Bear the Forces Exerted on the Tissue? / G. Peretti, U. Polito, M. Di Giancamillo, M.E. Andreis, F. Boschetti, A. Di Giancamillo. - In: TISSUE ENGINEERING, PART A. - ISSN 1937-3341. - 25:13-14(2019 Jul 01), pp. 978-989. [10.1089/ten.TEA.2018.0197]
partially_open
Prodotti della ricerca::01 - Articolo su periodico
6
262
Article (author)
no
G. Peretti, U. Polito, M. Di Giancamillo, M.E. Andreis, F. Boschetti, A. Di Giancamillo
File in questo prodotto:
File Dimensione Formato  
ten.tea.2018.0197.pdf

accesso riservato

Tipologia: Publisher's version/PDF
Dimensione 1.47 MB
Formato Adobe PDF
1.47 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
2019 Peretti et al TEA.pdf

accesso aperto

Tipologia: Post-print, accepted manuscript ecc. (versione accettata dall'editore)
Dimensione 880.41 kB
Formato Adobe PDF
880.41 kB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/2434/665095
Citazioni
  • ???jsp.display-item.citation.pmc??? 2
  • Scopus 3
  • ???jsp.display-item.citation.isi??? 4
social impact