About one hundred magnets of six different types shall be installed in the High Luminosity LHC (HL-LHC) in the years 2026 - 2028 at CERN. The magnets design, construction and test are based on CERN collaborations with institutes and industrial partners in USA, Spain, Italy, Japan and China. Three types of correctors are based on Nb-Ti technology and feature conductor peak fields in the 2 to 4 T range: for all of them the protoype phase has been successfully completed. The production is well advanced for the superferric correctors, and is starting for the canted cos theta correctors and for the nested correctors. The separation and recombination Nb-Ti dipoles D1 and D2, with a 4.5-6 T bore field range, are both in the prototype phase after the completion of the short model program. The most challenging magnet, the Nb3Sn quadrupole with conductor peak field above 11 T, is in the prototype phase at CERN and halfway through the production phase in the USA. In this paper we will give, for each type of magnet, an overview of the main achievements obtained so far and we will outline the technical points still needing validation from the prototype program.
Status and Challenges of the Interaction Region Magnets for HL-LHC / E. Todesco, S. Izquierdo Bermudez, A. Foussat, E. Gautheron, G. Kirby, H. Felice, J.C. Perez, J. Fleiter, C. Barth, A. Milanese, H. Prin, N. Lusa, J. Ferradas Troitino, S. Ferradas Troitino, F. Mangiarotti, R. Principe, G. Willering, D. Duarte Ramos, A. Ballarino, S. Russenschuck, A. Devred, M. Bednarek, F. Rodriguez-Mateos, M. Statera, M. Prioli, M. Sorbi, S. Mariotto, S. Farinon, A. Bersani, B. Caiffi, P. Fabbricatore, F. Levi, A. Pampaloni, F. Toral, C. Martins, J. Garcia Matos, T. Nakamoto, M. Sugano, K. Suzuki, Q. Xu, Y. Wang, W. Wei, G. Apollinari, R. Carcagno, S. Feher, G. Ambrosio, M. Baldini, M. Yu, A. Nobrega, A. Vouris, G. Chlachidze, S. Stoynev, K. Amm, J. Schmalzle, M. Anarella, J. Muratore, A. Ben Yahia, P. Joshi, P. Ferracin, S. Prestemon, D. Cheng, T. Strauss, L. Cooley. - In: IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. - ISSN 1051-8223. - 33:5(2023 Aug), pp. 4001608.1-4001608.8. [10.1109/TASC.2023.3244143]
Status and Challenges of the Interaction Region Magnets for HL-LHC
M. Sorbi;S. Mariotto;
2023
Abstract
About one hundred magnets of six different types shall be installed in the High Luminosity LHC (HL-LHC) in the years 2026 - 2028 at CERN. The magnets design, construction and test are based on CERN collaborations with institutes and industrial partners in USA, Spain, Italy, Japan and China. Three types of correctors are based on Nb-Ti technology and feature conductor peak fields in the 2 to 4 T range: for all of them the protoype phase has been successfully completed. The production is well advanced for the superferric correctors, and is starting for the canted cos theta correctors and for the nested correctors. The separation and recombination Nb-Ti dipoles D1 and D2, with a 4.5-6 T bore field range, are both in the prototype phase after the completion of the short model program. The most challenging magnet, the Nb3Sn quadrupole with conductor peak field above 11 T, is in the prototype phase at CERN and halfway through the production phase in the USA. In this paper we will give, for each type of magnet, an overview of the main achievements obtained so far and we will outline the technical points still needing validation from the prototype program.File | Dimensione | Formato | |
---|---|---|---|
Status_and_Challenges_of_the_Interaction_Region_Magnets_for_HL-LHC.pdf
accesso riservato
Tipologia:
Publisher's version/PDF
Dimensione
2.9 MB
Formato
Adobe PDF
|
2.9 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.