Objectives: To present the results of guided bone regeneration (GBR) of atrophic edentulous ridges with customized CAD/CAM titanium meshes. Material and methods: Forty-one patients, presenting with 53 atrophic sites, were enrolled between 2018 and 2019. GBR was obtained with titanium meshes filled with autogenous bone chips and bovine bone mineral (BBM). After a mean of 7 months (range: 5–12 months), meshes were removed and 106 implants placed. After a mean of 3.5 months (range: 2–5 months), implants were uncovered and prosthetic restorations started. The outcomes were vertical and horizontal bone augmentation changes, biological complications and implant survival. Results: Out of 53 sites, 11 underwent mesh exposure: eight of them were followed by uneventful integration of the graft, while three by partial bone loss. The mean vertical and horizontal bone gain after reconstruction was 4.78 ± 1.88 mm (range 1.00–8.90 mm) and 6.35 ± 2.10 mm (range 2.14–11.48 mm), respectively. At the time of implant placement, mean changes of initial bone gain were −0.39 ± 0.64 mm (range −3.1 to + 0.80 mm) and −0.49 ± 0.83 mm (range –3.7 to +0.4 mm), in the vertical and horizontal dimensions, respectively. Reduction of bone volume was significantly higher (p <.001 for both dimensions) in the exposed sites. The mean follow-up of implants after loading was 10.6 ± 6.5 months (range: 2–26 months). The survival rate of implants was 100%. Conclusion: Customized titanium meshes can represent a reliable tool for GBR of severely atrophic sites, with simplification of the surgical phases.

Customized CAD/CAM Titanium meshes for the guided bone regeneration of severe alveolar ridge defects: preliminary results of a retrospective clinical study in humans / M. Chiapasco, P. Casentini, G. Tommasato, C. Dellavia. - In: CLINICAL ORAL IMPLANTS RESEARCH. - ISSN 0905-7161. - (2021). [Epub ahead of print]

Customized CAD/CAM Titanium meshes for the guided bone regeneration of severe alveolar ridge defects: preliminary results of a retrospective clinical study in humans

M. Chiapasco
Primo
;
G. Tommasato;C. Dellavia
2021

Abstract

Objectives: To present the results of guided bone regeneration (GBR) of atrophic edentulous ridges with customized CAD/CAM titanium meshes. Material and methods: Forty-one patients, presenting with 53 atrophic sites, were enrolled between 2018 and 2019. GBR was obtained with titanium meshes filled with autogenous bone chips and bovine bone mineral (BBM). After a mean of 7 months (range: 5–12 months), meshes were removed and 106 implants placed. After a mean of 3.5 months (range: 2–5 months), implants were uncovered and prosthetic restorations started. The outcomes were vertical and horizontal bone augmentation changes, biological complications and implant survival. Results: Out of 53 sites, 11 underwent mesh exposure: eight of them were followed by uneventful integration of the graft, while three by partial bone loss. The mean vertical and horizontal bone gain after reconstruction was 4.78 ± 1.88 mm (range 1.00–8.90 mm) and 6.35 ± 2.10 mm (range 2.14–11.48 mm), respectively. At the time of implant placement, mean changes of initial bone gain were −0.39 ± 0.64 mm (range −3.1 to + 0.80 mm) and −0.49 ± 0.83 mm (range –3.7 to +0.4 mm), in the vertical and horizontal dimensions, respectively. Reduction of bone volume was significantly higher (p <.001 for both dimensions) in the exposed sites. The mean follow-up of implants after loading was 10.6 ± 6.5 months (range: 2–26 months). The survival rate of implants was 100%. Conclusion: Customized titanium meshes can represent a reliable tool for GBR of severely atrophic sites, with simplification of the surgical phases.
alveolar bone defects; autogenous bone; CAD-CAM; custom-made; dental implants; guided bone regeneration; implant-supported prosthesis; titanium mesh
Settore MED/28 - Malattie Odontostomatologiche
Settore MED/50 - Scienze Tecniche Mediche Applicate
Settore BIO/16 - Anatomia Umana
2021
6-feb-2021
Article (author)
File in questo prodotto:
File Dimensione Formato  
COIR 2021 Chiapasco-accepted.pdf

Open Access dal 07/02/2022

Tipologia: Post-print, accepted manuscript ecc. (versione accettata dall'editore)
Dimensione 14.75 MB
Formato Adobe PDF
14.75 MB Adobe PDF Visualizza/Apri
clr.13720.pdf

accesso riservato

Tipologia: Publisher's version/PDF
Dimensione 975.76 kB
Formato Adobe PDF
975.76 kB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/2434/813088
Citazioni
  • ???jsp.display-item.citation.pmc??? 10
  • Scopus 45
  • ???jsp.display-item.citation.isi??? 42
social impact