The jet induced by a rotating ship propeller can cause scouring of the seabed and consequent deposition of the scoured material nearby. Despite these effects are extremely important for the operability of a harbour, there is currently limited work concerning a detailed investigation of the three-dimensional (3D) characteristics of the bed topography changes induced by the ship propeller. Thus, this paper presents laboratory experiments with the aim of analysing the effects induced by a propeller on a mobile bed, in different conditions of submergence depth (h0) and rotational speed (n). The equilibrium bed surface topography was acquired with the photogrammetry technique combined with a 3D Terrestrial Laser Scanner (TLS), in order to analyse, for the first time, bed elevation data obtained from high-resolution Digital Elevation Models (DEMs). As a result, it was demonstrated that the swirling jet produced by a rotating propeller causes the development of a bed topography not symmetrical with respect to the propeller longitudinal axis, with a deeper scour hole on one side and a higher deposition mound on the other side. Therefore, the scour hole induced by a propeller cannot be assimilated to that produced by a water jet and this behaviour can be noted only with a comprehensive and detailed analysis of a 3D model of the bed topography. Furthermore, it was shown that increasing n for the same h0 (or reducing h0 by keeping n constant) causes a longer, deeper and wider scour hole and a higher deposition mound, with a greater volume of sediments eroded from the bed and deposited nearby the scour hole. To be precise, this is the first study aiming at estimating the eroded and deposited sediment volumes by a propeller jet, thanks to the use of the high-resolution DEMs. The relationships between all the involved variables were analysed, providing equations, graphs and an abacus for the prediction of the effects induced by the propeller as a function of h0 and the Froude number.
Three-dimensional analysis of local scouring induced by a rotating ship propeller / N. Penna, F. D'Alessandro, R. Gaudio, G.R. Tomasicchio. - In: OCEAN ENGINEERING. - ISSN 0029-8018. - 188(2019 Sep 15), pp. 106294.1-106294.11. [10.1016/j.oceaneng.2019.106294]
Three-dimensional analysis of local scouring induced by a rotating ship propeller
F. D'Alessandro;
2019
Abstract
The jet induced by a rotating ship propeller can cause scouring of the seabed and consequent deposition of the scoured material nearby. Despite these effects are extremely important for the operability of a harbour, there is currently limited work concerning a detailed investigation of the three-dimensional (3D) characteristics of the bed topography changes induced by the ship propeller. Thus, this paper presents laboratory experiments with the aim of analysing the effects induced by a propeller on a mobile bed, in different conditions of submergence depth (h0) and rotational speed (n). The equilibrium bed surface topography was acquired with the photogrammetry technique combined with a 3D Terrestrial Laser Scanner (TLS), in order to analyse, for the first time, bed elevation data obtained from high-resolution Digital Elevation Models (DEMs). As a result, it was demonstrated that the swirling jet produced by a rotating propeller causes the development of a bed topography not symmetrical with respect to the propeller longitudinal axis, with a deeper scour hole on one side and a higher deposition mound on the other side. Therefore, the scour hole induced by a propeller cannot be assimilated to that produced by a water jet and this behaviour can be noted only with a comprehensive and detailed analysis of a 3D model of the bed topography. Furthermore, it was shown that increasing n for the same h0 (or reducing h0 by keeping n constant) causes a longer, deeper and wider scour hole and a higher deposition mound, with a greater volume of sediments eroded from the bed and deposited nearby the scour hole. To be precise, this is the first study aiming at estimating the eroded and deposited sediment volumes by a propeller jet, thanks to the use of the high-resolution DEMs. The relationships between all the involved variables were analysed, providing equations, graphs and an abacus for the prediction of the effects induced by the propeller as a function of h0 and the Froude number.File | Dimensione | Formato | |
---|---|---|---|
J.20_OE_188_2019.pdf
Open Access dal 16/09/2021
Tipologia:
Post-print, accepted manuscript ecc. (versione accettata dall'editore)
Dimensione
15.53 MB
Formato
Adobe PDF
|
15.53 MB | Adobe PDF | Visualizza/Apri |
1-s2.0-S0029801819304664-main.pdf
accesso riservato
Tipologia:
Publisher's version/PDF
Dimensione
4.94 MB
Formato
Adobe PDF
|
4.94 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.