Body center of mass trajectory and mechanical energy using inertial sensors: a feasible stride?

Background: The description of the three-dimensional (3D) trajectory of the body center of mass (BCoM) provides useful insights on the mechanics of locomotion. The BCoM trajectory can be estimated from ground reaction forces, recorded by force platforms (GRF, gold standard), or from marker trajectories recorded by stereophotogrammetric systems (MKR). However, both instruments do not allow for monitoring locomotion in the real-life environment. In this perspective, magneto-inertial measurement units (MIMUs) are particularly attractive being wearable, thus enabling to collect movement data out of the laboratory. Research questions: To investigate the feasibility and accuracy of a recent marketed full-body MIMU-based method for the estimation of the 3D BCoM trajectory and energetics during walking. Methods: Twelve subjects walked at self-selected and slow speed along a 12 m long walkway. GRF and MKR were acquired using three force platforms and a stereophotogrammetric system. MIMU data were collected using a full-body MIMU-based motion capture system (Xsens MTw Awinda). The 3D BCoM trajectory, external mechanical work and energy recovery were extracted from the data acquired by the three measurement systems, using state-of-the-art methods. The accuracy of both MKR- and MIMU-based estimates compared with GRF was assessed for the BCoM trajectory (maximum, minimum, range, and RMSD), as well as for mechanical work and energy recovery. Results: A total number of 108 strides were analyzed. MIMU-based BCoM trajectory displayed larger errors in comparison with GRF (and MKR) for the trajectory ranges: 89 ± 47(93 ± 44)% in antero-posterior, 46 ± 25(40 ± 79)% medio-lateral and -13 ± 23(-5 ± 25)% vertical directions, leading to a 3D RMSD of 17 ± 5(12 ± 5) mm (mean ± SD). These discrepancies largely affected the estimation of both mechanical work and energy recovery (+115 ± 85% and -28 ± 21%, respectively). Significance: Preliminary findings highlighted that the tested MIMU-based method for BCoM trajectory estimation still lacks accuracy and that the quantification of energetics in real-life situations remains an open challenge. ©