A new synthesis of methacrylate end-capped Poly (3,4-ethylenedioxythiophene) (PEDOT) was performed: it is soluble in common organic solvents, thus overcoming the well-known technical problems related to the use of commercial PEDOT in different printing technologies, such as screen printing, due to its poor processability and compatibility in formulations with other resins and polymers [1]. The new synthetic method developed is based on the direct oxidative polycondensation of 3,4-ethylenedioxythiophene (EDOT) in the presence of an oxidant species and a cross-linkable end-capper, i.e. methacrylate end-capped EDOT (mEDOT), prepared via Friedel Crafts acylation with methacryloyl chloride. The oxidative polycondensation between EDOT and mEDOT monomers in the presence of a new kind of doping agent, Sulfonated Polyarylethersulfone (SPAES) [2,3] - characterized by different degree of sulfonation (DS) - was conducted, leading to functional end-capped conducting PEDOT, with conductivity of 210 S/cm, 50 S/cm higher than the one of commercial PEDOT. Thanks to the enhancement of solubility, leading to better processability, end-capped PEDOTs were formulated with a thermoplastic ink, Plastisol®, and electronic circuits were successfully screen printed on flexible textile substrates [4,5], in order to obtain wearable electronic circuits [6] (Figure 1).
Conductive inks based on methacrylate end-capped poly (3,4-ethylenedioxythiophene) for printed, flexible and wearable electronics / V. Sabatini, H. Farina, M.A. Ortenzi. ((Intervento presentato al 1. convegno Mipol tenutosi a Milano nel 2017.
Conductive inks based on methacrylate end-capped poly (3,4-ethylenedioxythiophene) for printed, flexible and wearable electronics
V. Sabatini;H. Farina;M.A. Ortenzi
2017
Abstract
A new synthesis of methacrylate end-capped Poly (3,4-ethylenedioxythiophene) (PEDOT) was performed: it is soluble in common organic solvents, thus overcoming the well-known technical problems related to the use of commercial PEDOT in different printing technologies, such as screen printing, due to its poor processability and compatibility in formulations with other resins and polymers [1]. The new synthetic method developed is based on the direct oxidative polycondensation of 3,4-ethylenedioxythiophene (EDOT) in the presence of an oxidant species and a cross-linkable end-capper, i.e. methacrylate end-capped EDOT (mEDOT), prepared via Friedel Crafts acylation with methacryloyl chloride. The oxidative polycondensation between EDOT and mEDOT monomers in the presence of a new kind of doping agent, Sulfonated Polyarylethersulfone (SPAES) [2,3] - characterized by different degree of sulfonation (DS) - was conducted, leading to functional end-capped conducting PEDOT, with conductivity of 210 S/cm, 50 S/cm higher than the one of commercial PEDOT. Thanks to the enhancement of solubility, leading to better processability, end-capped PEDOTs were formulated with a thermoplastic ink, Plastisol®, and electronic circuits were successfully screen printed on flexible textile substrates [4,5], in order to obtain wearable electronic circuits [6] (Figure 1).File | Dimensione | Formato | |
---|---|---|---|
Poster Mipol.pdf
accesso aperto
Tipologia:
Altro
Dimensione
2.48 MB
Formato
Adobe PDF
|
2.48 MB | Adobe PDF | Visualizza/Apri |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.