Bio-syngas, i.e. the syngas mixture produced from biomass, is mainly characterized from a H2/CO molar ratio in the range 1.0-1.5, different from those of traditional syngas equal to 2. By feeding directly this mixture in a catalytic reactor for Fischer-Tropsch synthesis, iron based catalysts are more suitable with respect to the cobalt-based one. These catalysts are used industrially in their massive form. The possibility to use supported Fe-based catalysts are recently deeply considered in order to improve the surface area and the mechanical stability of the samples. In particular high Fe loaded supported catalysts are required to achieve satisfactory performance. Iron-based catalysts supported on silica for CO hydrogenation with 30%wt of metal have been prepared, characterized by BET, SEM, TEM, TPR, XRD and tested at different temperature and H2/CO ratio in a FT laboratory plant using a Packed Bed Reactor. On the basis of the collected data, a multi-scale simulation of the FT synthesis reactor has been developed considering that on the catalyst surface the reaction both of FT and Water Gas Shift are simultaneously activated. The experimental results demonstrated that by increasing the inlet H2/CO ratio, the CO conversion can be increased while preserving the products selectivity and confirm that FT are suitable also for low H2/CO ratio; furthermore the model elaborated agree with the experimental data obtained.

Bio-syngas conversion by FT synthesis with high loaded Fe-based catalysts: kinetic parameters regression / A. Comazzi, F. Galli, M. Galimberti, F. Manenti, C.L.M. Bianchi, C. Pirola (COMPUTER-AIDED CHEMICAL ENGINEERING). - In: European Symposium on Computer Aided Process Engineering / [a cura di] Z. Kravanja, M. Bogataj. - Prima edizione. - [s.l] : Elsevier, 2016. - ISBN 9780444634283. - pp. 589-594 (( Intervento presentato al 26. convegno European Symposium on Computer Aided Process Engineering tenutosi a Portoroz nel 2016 [10.1016/B978-0-444-63428-3.50103-X].

Bio-syngas conversion by FT synthesis with high loaded Fe-based catalysts: kinetic parameters regression

A. Comazzi
Primo
;
F. Galli
Secondo
;
C.L.M. Bianchi
Penultimo
;
C. Pirola
Ultimo
2016

Abstract

Bio-syngas, i.e. the syngas mixture produced from biomass, is mainly characterized from a H2/CO molar ratio in the range 1.0-1.5, different from those of traditional syngas equal to 2. By feeding directly this mixture in a catalytic reactor for Fischer-Tropsch synthesis, iron based catalysts are more suitable with respect to the cobalt-based one. These catalysts are used industrially in their massive form. The possibility to use supported Fe-based catalysts are recently deeply considered in order to improve the surface area and the mechanical stability of the samples. In particular high Fe loaded supported catalysts are required to achieve satisfactory performance. Iron-based catalysts supported on silica for CO hydrogenation with 30%wt of metal have been prepared, characterized by BET, SEM, TEM, TPR, XRD and tested at different temperature and H2/CO ratio in a FT laboratory plant using a Packed Bed Reactor. On the basis of the collected data, a multi-scale simulation of the FT synthesis reactor has been developed considering that on the catalyst surface the reaction both of FT and Water Gas Shift are simultaneously activated. The experimental results demonstrated that by increasing the inlet H2/CO ratio, the CO conversion can be increased while preserving the products selectivity and confirm that FT are suitable also for low H2/CO ratio; furthermore the model elaborated agree with the experimental data obtained.
Settore ING-IND/25 - Impianti Chimici
2016
Book Part (author)
File in questo prodotto:
File Dimensione Formato  
201-3fc0-ESCAPE_FT_FINAL.pdf

accesso riservato

Tipologia: Publisher's version/PDF
Dimensione 561.11 kB
Formato Adobe PDF
561.11 kB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/2434/425357
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 4
  • ???jsp.display-item.citation.isi??? 3
social impact