Stress is defined as the force applied to a material, while strain is the consequent deformation. In the whole lung, stress can be roughly approximated by the transpulmonary pressure, whereas the approximation of the average strain is the change in volume relative to the lung resting volume. The same tidal volume per kilogram may result in completely different strain according to the size of the baby lung (the V0 of the previous equation). For example, a 70-kg man with ARDS may have, according to the severity of the lung injury, a residual baby lung equal to 60%, 40%, or 20% of his normal lung size. If the ventilator is set to deliver 10 mL/kg, the actual delivered tidal volume would generate an alveolar strain, which would result from the application, in normal lung, of a tidal volume equal to 17 mL/kg, 25 mL/kg, and 50 mL/kg, values associated with a significant lung injury in laboratory studies. Recently we attempted to quantify the relationship between stress-strain and VILI in healthy animals. We found that edema formation was a threshold phenomenon, induced by mechanical ventilation when the global strain reaches a critical value of about 2. This threshold roughly corresponds to the point where the stress-strain curve loses its linearity and starts an exponential growth, indicating that some lung regions reach their own total capacity and cannot expand any further. At this level of strain, in period of 24-48 hours the mechanical ventilation is lethal and the increased lung weight (2-3 times the baseline) is associated with a striking impairment of respiratory mechanics, gas exchange, hemodynamics, inflammation, distal organs damage and 100% mortality. This lethal strain, and associated stress, however, are rarely applied in clinical practice. To explain VILI in a diseases lung, therefore, alternative phenomena must be taken into account as the lung dishomogeneity and the presence of stress risers.

Lung stress and strain during mechanical ventilation / L. Gattinoni. ((Intervento presentato al 6. convegno Curso taller de ventilacion mecanica tenutosi a Bogotà nel 2013.

Lung stress and strain during mechanical ventilation

L. Gattinoni
Primo
2013-07-05

Abstract

Stress is defined as the force applied to a material, while strain is the consequent deformation. In the whole lung, stress can be roughly approximated by the transpulmonary pressure, whereas the approximation of the average strain is the change in volume relative to the lung resting volume. The same tidal volume per kilogram may result in completely different strain according to the size of the baby lung (the V0 of the previous equation). For example, a 70-kg man with ARDS may have, according to the severity of the lung injury, a residual baby lung equal to 60%, 40%, or 20% of his normal lung size. If the ventilator is set to deliver 10 mL/kg, the actual delivered tidal volume would generate an alveolar strain, which would result from the application, in normal lung, of a tidal volume equal to 17 mL/kg, 25 mL/kg, and 50 mL/kg, values associated with a significant lung injury in laboratory studies. Recently we attempted to quantify the relationship between stress-strain and VILI in healthy animals. We found that edema formation was a threshold phenomenon, induced by mechanical ventilation when the global strain reaches a critical value of about 2. This threshold roughly corresponds to the point where the stress-strain curve loses its linearity and starts an exponential growth, indicating that some lung regions reach their own total capacity and cannot expand any further. At this level of strain, in period of 24-48 hours the mechanical ventilation is lethal and the increased lung weight (2-3 times the baseline) is associated with a striking impairment of respiratory mechanics, gas exchange, hemodynamics, inflammation, distal organs damage and 100% mortality. This lethal strain, and associated stress, however, are rarely applied in clinical practice. To explain VILI in a diseases lung, therefore, alternative phenomena must be taken into account as the lung dishomogeneity and the presence of stress risers.
Settore MED/41 - Anestesiologia
Lung stress and strain during mechanical ventilation / L. Gattinoni. ((Intervento presentato al 6. convegno Curso taller de ventilacion mecanica tenutosi a Bogotà nel 2013.
Conference Object
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

Caricamento pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: http://hdl.handle.net/2434/222550
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact