INTRODUCTION The sensing of gas molecules is of primary importance for environmental monitoring, control of chemical processes, medical applications, and so on1. In recent years, graphene-based gas sensors have attracted much attention due to enhanced graphene thermo-electric conductivity, surface area and mechanical strength. Thus, different structures have been developed and high sensing performances and room temperature working conditions were achieved1. However, they still suffer from several problems, which could be overcome by covering the graphene surface with metal oxide nanoparticles2. Furthermore, studies regarding the detection of Volatile Organic Compounds (VOCs) are still at the beginning1. Hence, the present work will be aimed at: i) optimizing the synthetic routes of ad hoc composite VOCs sensing materials (based on graphene oxide/SnO2 or ZnO hybrids) and their deep physico-chemical characterizations; ii) engineering the gas sensor device; and iii) evaluating the sensing performances at both high and mild temperatures (also exploiting the UV light) towards gaseous ethanol, acetone and ethylbenzene. EXPERIMENTAL/THEORETICAL STUDY Starting from pure graphite, graphene oxide (GO) powder was synthesized by adopting the Hummer’s modified method2. The synthetic route was deeply investigated by modulating both the starting carbon material (powder or flakes graphite) and the concentration of the H2O2 (i.e. the quenching/oxidizing agent), thus tailoring the final GO surface/structural properties. Once optimized this step, SnO2 or ZnO were grown on its surface by a hydrothermal method, varying the starting salt precursor/GO weight ratio (ZnxGO or SnxGO, x = 4, 8, 16, 32). For comparison, pure SnO2 and ZnO (both commercial and home-made) were also tested. Several physico-chemical techniques have been used to characterize all the as-prepared nanopowders, such as XRPD, BET, Raman, FTIR, XPS, TEM and electrochemical analyses (CV and EIS). Subsequently, a homogeneous layer was deposited by spraying technique onto Pt-Interdigitated Electrodes (IDEs) starting from an ethanol suspension of each sample (2.5 mg mL-1). Then, gaseous ethanol, acetone and ethylbenzene (the more interesting one, being nowadays the less studied VOC) were sensed by using a Linkam Scientific stage, equipped with an electrochemical workstation for the chronoamperometric measurements. RESULTS AND DISCUSSION The effective synthesis of graphene oxide sheets and, subsequently, the growth of metal oxide nanoparticles on its surface were confirmed by exploiting different physico-chemical techniques. As concerns the VOCs sensing analyses, we obtained very promising results (in terms of both response/recovery time and sensibility down to ppb levels) for either pure and hybrid materials at 350°C, and at lower temperatures (150°C to RT, by exploiting UV light) for the graphene-based samples (Figure 1), thanks to the presence of the carbon material.Furthermore, a similar behavior has been noticed towards acetone and ethylbenzene pollutants. CONCLUSION Very promising results have been obtained with graphene oxide-based materials, which reveal to be more performing than the corresponding pure samples. Hence, these powders may represent very potential candidates for the gas sensing of highly toxic VOCs traces, both for environmental and medical diagnosis1 purposes.

Graphene Oxide-Based Hybrids for Chemiresistive VOCs Sensors / E. Pargoletti, A. Tricoli, S. Orsini, V. Pifferi, M. Longhi, V. Guglielmi, L. Falciola, G. Cappelletti. ((Intervento presentato al convegno Advanced Energy Materials : AEM tenutosi a Guildford nel 2018.

Graphene Oxide-Based Hybrids for Chemiresistive VOCs Sensors

E. Pargoletti
Primo
;
V. Pifferi;M. Longhi;V. Guglielmi;L. Falciola;G. Cappelletti
Ultimo
2018

Abstract

INTRODUCTION The sensing of gas molecules is of primary importance for environmental monitoring, control of chemical processes, medical applications, and so on1. In recent years, graphene-based gas sensors have attracted much attention due to enhanced graphene thermo-electric conductivity, surface area and mechanical strength. Thus, different structures have been developed and high sensing performances and room temperature working conditions were achieved1. However, they still suffer from several problems, which could be overcome by covering the graphene surface with metal oxide nanoparticles2. Furthermore, studies regarding the detection of Volatile Organic Compounds (VOCs) are still at the beginning1. Hence, the present work will be aimed at: i) optimizing the synthetic routes of ad hoc composite VOCs sensing materials (based on graphene oxide/SnO2 or ZnO hybrids) and their deep physico-chemical characterizations; ii) engineering the gas sensor device; and iii) evaluating the sensing performances at both high and mild temperatures (also exploiting the UV light) towards gaseous ethanol, acetone and ethylbenzene. EXPERIMENTAL/THEORETICAL STUDY Starting from pure graphite, graphene oxide (GO) powder was synthesized by adopting the Hummer’s modified method2. The synthetic route was deeply investigated by modulating both the starting carbon material (powder or flakes graphite) and the concentration of the H2O2 (i.e. the quenching/oxidizing agent), thus tailoring the final GO surface/structural properties. Once optimized this step, SnO2 or ZnO were grown on its surface by a hydrothermal method, varying the starting salt precursor/GO weight ratio (ZnxGO or SnxGO, x = 4, 8, 16, 32). For comparison, pure SnO2 and ZnO (both commercial and home-made) were also tested. Several physico-chemical techniques have been used to characterize all the as-prepared nanopowders, such as XRPD, BET, Raman, FTIR, XPS, TEM and electrochemical analyses (CV and EIS). Subsequently, a homogeneous layer was deposited by spraying technique onto Pt-Interdigitated Electrodes (IDEs) starting from an ethanol suspension of each sample (2.5 mg mL-1). Then, gaseous ethanol, acetone and ethylbenzene (the more interesting one, being nowadays the less studied VOC) were sensed by using a Linkam Scientific stage, equipped with an electrochemical workstation for the chronoamperometric measurements. RESULTS AND DISCUSSION The effective synthesis of graphene oxide sheets and, subsequently, the growth of metal oxide nanoparticles on its surface were confirmed by exploiting different physico-chemical techniques. As concerns the VOCs sensing analyses, we obtained very promising results (in terms of both response/recovery time and sensibility down to ppb levels) for either pure and hybrid materials at 350°C, and at lower temperatures (150°C to RT, by exploiting UV light) for the graphene-based samples (Figure 1), thanks to the presence of the carbon material.Furthermore, a similar behavior has been noticed towards acetone and ethylbenzene pollutants. CONCLUSION Very promising results have been obtained with graphene oxide-based materials, which reveal to be more performing than the corresponding pure samples. Hence, these powders may represent very potential candidates for the gas sensing of highly toxic VOCs traces, both for environmental and medical diagnosis1 purposes.
12-set-2018
Settore CHIM/02 - Chimica Fisica
Graphene Oxide-Based Hybrids for Chemiresistive VOCs Sensors / E. Pargoletti, A. Tricoli, S. Orsini, V. Pifferi, M. Longhi, V. Guglielmi, L. Falciola, G. Cappelletti. ((Intervento presentato al convegno Advanced Energy Materials : AEM tenutosi a Guildford nel 2018.
Conference Object
File in questo prodotto:
File Dimensione Formato  
AGM-graphene-materials-oral-PARGOLETTI.pdf

accesso aperto

Tipologia: Altro
Dimensione 646.72 kB
Formato Adobe PDF
646.72 kB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/2434/588770
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact