The photocatalytic production of hydrogen from water solutions has been investigated, either in a recirculation laboratory scale apparatus with photocatalysts immobilized on porous supports and continuously fed with vapor, or in a two compartments cell, allowing the separate production of hydrogen and oxygen from water photosplitting. A series of TiO2-based photocatalysts, modified by noble metal nanoparticles deposition by different techniques, or synthesized in single step by flame spray pyrolysis, has been tested in the first apparatus, usually employing methanol as sacrificial agent, i.e. in a low temperature steam reforming reaction. Aiming at extending the photocatalytic response into the visible region, a series of NH4F-doped, noble metal-modified TiO2 photocatalysts, exhibiting good performances in the photocatalytic oxidation of organics,5 has also been tested. Hydrogen was always found to evolve at constant rate, which significantly increased upon noble metals addition, Pt being the most effective co-catalyst, especially if deposited by flame spray pyrolysis in one step, followed by gold and silver, according to the difference between their work function values and that of titania. A kinetic model for the oxidation processes occurring in parallel to hydrogen production has been proposed, based on formaldehyde, formic acid and CO2 production rate profiles as a function of methanol partial pressure. The photoactive material in the two compartments cell3 consisted in a thin titanium dioxide layer deposited on the irradiated face of a titanium disk in contact with a basic solution. Oxygen evolved at constant rate from the illuminated TiO2 surface, whereas hydrogen evolution occurred on the opposite side of the photoelectrode, which was modified by Pt deposition. The H2 production rate was found to increase in the presence of electron donors more efficient than water in contact with the illuminated photoanode. Recent efforts have been focused on the optimization of the cell operation conditions and on the development of more efficient photocatalytic thin layers possibly extending photoactivity to a larger portion of the solar spectrum.

Photocatalytic Materials for Hydrogen Production / G.L. Chiarello, M.V. Dozzi, E. Selli. ((Intervento presentato al convegno Convegno Nazionale di Fotochimica tenutosi a Giardini Naxos (ME) nel 2011.

Photocatalytic Materials for Hydrogen Production

G.L. Chiarello
Primo
;
M.V. Dozzi
Secondo
;
E. Selli
Ultimo
2011

Abstract

The photocatalytic production of hydrogen from water solutions has been investigated, either in a recirculation laboratory scale apparatus with photocatalysts immobilized on porous supports and continuously fed with vapor, or in a two compartments cell, allowing the separate production of hydrogen and oxygen from water photosplitting. A series of TiO2-based photocatalysts, modified by noble metal nanoparticles deposition by different techniques, or synthesized in single step by flame spray pyrolysis, has been tested in the first apparatus, usually employing methanol as sacrificial agent, i.e. in a low temperature steam reforming reaction. Aiming at extending the photocatalytic response into the visible region, a series of NH4F-doped, noble metal-modified TiO2 photocatalysts, exhibiting good performances in the photocatalytic oxidation of organics,5 has also been tested. Hydrogen was always found to evolve at constant rate, which significantly increased upon noble metals addition, Pt being the most effective co-catalyst, especially if deposited by flame spray pyrolysis in one step, followed by gold and silver, according to the difference between their work function values and that of titania. A kinetic model for the oxidation processes occurring in parallel to hydrogen production has been proposed, based on formaldehyde, formic acid and CO2 production rate profiles as a function of methanol partial pressure. The photoactive material in the two compartments cell3 consisted in a thin titanium dioxide layer deposited on the irradiated face of a titanium disk in contact with a basic solution. Oxygen evolved at constant rate from the illuminated TiO2 surface, whereas hydrogen evolution occurred on the opposite side of the photoelectrode, which was modified by Pt deposition. The H2 production rate was found to increase in the presence of electron donors more efficient than water in contact with the illuminated photoanode. Recent efforts have been focused on the optimization of the cell operation conditions and on the development of more efficient photocatalytic thin layers possibly extending photoactivity to a larger portion of the solar spectrum.
11-giu-2011
Settore CHIM/02 - Chimica Fisica
Photocatalytic Materials for Hydrogen Production / G.L. Chiarello, M.V. Dozzi, E. Selli. ((Intervento presentato al convegno Convegno Nazionale di Fotochimica tenutosi a Giardini Naxos (ME) nel 2011.
Conference Object
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/2434/161941
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact